CHINA HANTEL HT6088 DED SET SOLVE

result: Rx:4 Tx:5



COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:DD0E:DC69
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.CF0C0F96.[M108_PCB01_GPRS_MT6226_S01.S518_HW_05C_S518BT.B_ZYZX_G_V1.1.4.E.G_BUILD_NO.BIN_8847338D].rpl
identification#1 detection finished
device-id: CF0C0F96
identification#1 protocol ver: 04
ver. sw1: M108_PCB01_GPRS_MT6226_S01.S518_HW_05C_S518BT.B_ZYZX_G_V1.1.4.E.G_BUILD_NO.BIN
ver. sw2: S518BT.B_ZYZX_G_V1.1.4.E.G, 72CCB877
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [eeprom[M108_PCB01_GPRS_MT6226_S01.S518_HW_05C_S518BT.B_ZYZX_G_V1.1.4.E.G_BUILD_NO.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[M108_PCB01_GPRS_MT6226_S01.S518_HW_05C_S518BT.B_ZYZX_G_V1.1.4.E.G_BUILD_NO.BIN]_20080305-162956.B0E.bin
flash: 01227E22202200:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22202200:29EA0000000000
Write Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log_CF0C0F96_M108_PCB01_GPRS_MT6226_S01.S518_HW_05C_S518BT.B_ZYZX_G_V1.1.4.E.G_BUILD_NO.BIN_8847338D_20080305-163017.B0X.bin
Finished, time used: 355 sec
Remove/Install battery now !

Very nice job..keep on rocking

nice rocky