update of SEtool box

v0.914026/UNI

bugfixes,bugfixes...

- fixed cid52 OTP writing, was broken eons ego.
- added DB2020 emptyboards eroms, which are safe to use with EROM upgrade.
- pnx5230 support was broken, should be fixed, reports are welcome.
- changed usb support, perhaps will be better,perhaps not.
public testing will show results.
- some internal changes/bugs/bugfixes/etc

rapidshare link:
http://rapidshare.com/files/97639319...14026.exe.html

please note.
update can ONLY be applied on v0.914020 installation.

as it is too much questions about promised release, some answers here.
it will be free FAST (~2 min) standalone patch support for cid52 db2012,db2020,pnx5230, cid53 pnx5230.
(if i get retail w380, guess will get it - have plenty of time before release)

so, that all on it.
lets find and clean bugs now.

v0.914034

- added FREE STANDALONE new alternative bypass method
for db201x cid53 phones.

please note that due lack of all needed loaders,
"identify" for cid53 db201x phones will only work with DCU60.


Plz Download from support area

SETOOL UPDATE v0.914036

- added support for new locosto-based ODM phones - T270,T280,R300,R306,T303,etc.
supported flash,correct unlock by patch,usercode reset.
be careful - select CORRECT model and CORRECT flashfiles.
- updated phone model names
- minor bugfixes
uploaded r300 r2ba005 firmware
uploaded t280 r2bc002 firmware
uploaded t303 r2ba005 firmware

http://rs241.rapidshare.com/files/124675815/v0.914029_to_v0.914036.exe

NEW Update v0.914037

- added testpoint for db2020 phones.
db2020 testpoint idea made by dre_ambox team.
as i respected that, i not included db2020 testpoint in setool2
for a long time. but anything ends sometime.
now, setool2 users can enjoy gdfs db2020 gdfs repair.

usage:
1. it is only and only for professional.
users,advanced users, please go away.
2. testpoint is +3.3 voltage, connected to specific pin.
we suggesting to use +3.3v battery
(battery ground MUST be connected with phone's GROUND)
3. go to emptyboard fill & repair.
4. select any db2020 model.
5. press "TP STAGE #1". read instructions and execute them.
6. press "TP STAGE #2". read instructions and execute them.
7. phone is BROWN now.
8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
9. if flashing went fine, flash db2020 erom with needed CID.
10. phone now retail and repaired. fullflash phone as usual.
testpoint pictures (courtesy of drea_mbox team) included.
after SETOOL2 db2020 testpoint procedure phone FULLY
working in "alternative security bypass" mode withoyt ANY restriction.

- greatly increased locosto-based SEMC ODM phones security bypass time.
(instead ~50 seconds, now we have ~18 seconds)
- minor bugfixes.

RAPIDSHARE Dowload: LINK

Here is link for setool_v6.7.rar" (30.67 MB)

http://www.megaupload.com/?d=C6GOAEXS

THANKS FOR SHEAR THIS NEW

Very Good sharing buddies

new update
Code:
---------
*v0.914040*

- updated a2 loaders to recent versions
- added db3210 support
- updated bypass packages
- minor bugfixes

rapidshare LINK (http://rapidshare.com/files/14601343...14040.exe.html)

Hello,


v0.914041

- fixed old security PDA standalone support
- updated bypass packages
- minor bugfixes

http://rapidshare.com/files/14692413..._v0.914041.exe

Se tool video tutorials









Here you can find video tutorial for Se Tool users.

CALYPSO LITE:
Unlock

CID36 DB2010 Phones:

Full Repair
Unlock

CID49 DB2010 Phones:

Full Flash
Repair GDFS
Repair/Change IMEI

CID52 DB2012 Phones:

Free Flash

CID49 DB2020 Phones:

Flash + Unlock (1 log)
Unlock
Free Flash
Repair/Change IMEI
Reset usercode
Upgrade EROM

CID51 DB2020 Phones:

Unlock
Repair/Change IMEI
Free Unlock (upgrading phone to CID52)

CID52 DB2020 Phones:

Full Flash
Reset Usercode
Free patch unlock
Free IMEI change / repair

PNX5230 (Z310):

Unlock

A2 Phones:
Flash
Reset Usercode

PDA:

OLD SECURITY:

Flash
Unlock

NEW SECURITY:
Unlock

Special Thanks to "Unlocker" for this : http://www.setool.net/video/index.php

latest news from the_laser,

yes, kukuruzer's owners somehow get extremly useful device (access,dongle,whatever)
and can repair any software problem/unlock phones without waiting and disassembling.
plus, solution is fully protected - cause it using original signed loaders.

if they using some original device/access
(very hardly believe that "dear friend flead" break several p96 keys, it is like bruteforce RSA1024 key, even tougher) then
SEMC can and will stop that device/access from working, which will be somewhat "sad"

but if they have standalone device without counter or stole auth keys
(imho, impossible) - i can only envy them. in that case in several
month only kukuruzer will stay on semc market as dominating tool.

sadly, i'm unable to get such device/access.

so you can forget about no-tp repair in setool2. at least, until i get same things

but you can repair most problems with testpoint and unlock phones by patch.
free and standalone.

if you not like that - please go and buy kukuruzers credits, i'm not forcing anyone to use my software.


anyway - we can make their earnings and your mourns "a bit" smaller:

we decided to release out security hole based solution for a2.

our solution will be able to fully repair/unlock a2 phones, but will do it correctly.

current kukuruzer implementation has several flaws:

- in version 1.0 of their release software simple killing phones, after
user entered unlock code. that is because kukuruzer programmer not made
one important thing, which is somewhat tricky to do.
- in version 1.1 of their release they "fix" that problem by leaving
phones in "factory" state, thus making impossible to flash them on
anything other than 3rd-party tools.
i did not see any problems in it, only advantages: you can flash brown firmwares in phone and that is great.
but, if phone will be sent to warranty, it will be effectively declined.
- finally, kukuruzers procedure unrecoverable damage unique security
keys, which are stored in each phone. you can check it by entering
"service menu->security test " before and after reset procedure.

anyway, that is really not important and will be fixed after i release my solution or before it ( hardly believe, though)

date of release: soon.
(i need to test my solution on one phone, which is still not in my hands.
cause i do not want to release non-working things.)

will it be standalone? no.
will it require logs? maybe yes, maybe no.

thats all on that topic, i will not return to it until release.

new update v0.914042

http://rapidshare.com/files/158477330/042.rar

fixed bugs version

http://rapidshare.com/files/159390879/v0.915016.rar

the_laser's post

absolutely forgot to add one important information:


Code:
---------
test menu code for

kf75x
338464#*#

ku580
1475369586#*#

you will require it to reset user code/etc.

br.

v0.915016
v0.915017

http://rapidshare.com/files/160220232/v0.915017.rar

v0.915018

- security backup was saved with wrong script command, fixed,
thx to gbluez for reporting.

RAPIDSHARE LINK

Latest update here

http://kapablek.com/setool.php

&

http://rapidshare.com/files/16281287..._v0.915019.exe

v0.915020

- solved issue with lg kf75x phones with '01xxxx' IMEIs
such phones will be hanled and recognized automatically, but
you must manually enter generated unlock code.
unlock code can be entered by typing 2945#*750#
(in some cases, it will not work until you flash generic (open) firmware)
- latest bypass packages added
- misc bugfixes


rapidshare LINK

new update


Code:
---------
*v0.915021*

- issue with some rare semc A2 phones,which failed to unlock, should be solved
- latest bypass packages added
- misc bugfixes

rapidshare LINK (http://rapidshare.com/files/16840575..._v0.915021.exe)

v0.915025

- reintroduced direct unlock for telcel lg kf750/kf755
- added support for sagem my750x (experimental)
- added support for lg kf757,lg ks520 (experimental)
- added signed mode for locosto,neptune semc odm phones
"signed mode" should be checked
signed flashfiles should be used (uploaded on support)
possible flashing,userlock reset,total call time reset
network unlock not enabled (will be done later, via server)

note ! not all semc odm phones support USB (only latest)
note ! most odm phones in signed mode will work stable on 460800 baud
note ! backups of trim area, made in signed and in unsigned mode
ARE NOT EXCHANGEABLE !!!!

- removed auto-ignition for semc odm phones when using 4in1 cable,
use manual ignition - that will eliminate troubles with booting that phones.
- latest bypass packages added
- misc bugfixes
- a lot of bugs, need to find and eliminate

rapidshare LINK

experimental - means support is NOT TESTED.
if you fear to damage your phone - DO NOT USE EXPERIMENTAL features.