jonigsm

Would you like to react to this message? Create an account in a few clicks or log in to continue.
jonigsm

    procedure to flash se handset with cruiser

    avatar
    sabby_singh
    MODERATOR


    Posts : 47
    Join date : 2008-02-24

    procedure to flash se handset with cruiser Empty procedure to flash se handset with cruiser

    Post by sabby_singh Tue Feb 26, 2008 12:40 pm

    Guidelines Flashing
    Z520i


    Attach the Phone
    Repair EROM
    Flash ARM
    Write Raw FS
    Customize FS
    Shutdown FS

    Attach the Phone
    Direct Unlock


    W900i


    Attach the Phone
    Unlock RSA
    Flash ARM
    Write Raw FS
    Customize FS
    Turn Off the Phone

    Attach the Phone
    Unlock RSA
    Direct Unlock
    Restore Firmware
    Turn Off the Phone


    W550i


    Attach the Phone
    Unlock RSA
    Write Raw FS
    Customize FS
    Turn Off the Phone

    Attach the Phone
    Flash ARM



    W810i


    @@@ Solution W810 Unlock Or Hang @@@
    WARNING: full battery + speed 115200 needed

    1: attache the phone
    2: unlock rsa after the phone dettache auto
    3: remove batteri and put again ---attache phone
    4: flash ARM with this file "W810i_CXC1250316_Generic_R4CK003_Red49.cw81sw "
    5: restore firmware

    NOW THE PHONE IS 10000% ALIVE




    1.) attach phone
    2.) unlock rsa
    3.) remove battery
    4.) attach battery
    5.) attach phone
    6.) flash arm (W810c_CXC1250317_China_R4DB005_Red49.cw81sw)
    7.) write raw fs (W810c_CXC1250324_China_R4DB005_Red49.cw81fs)
    8.) customize fs (if prompted to "unlock rsa" detach phone then do steps 1-5)
    if success in "customize fs" go to file system and "shutdown fs" and
    restore firmware. (usually phone will turn on) if not do step 9.
    9.) after doing steps 1-5, then "customize fs"
    10.) shutdown fs
    11.) restore firmware
    hope this will help you.





    k750i CID49 RED dead repair PROCEDURE.
    I test this procedure whit 3 phone K750i whit firmware R1ca021 CID 49RED and work well so i sticky to help who have dead K750i and stop flashing at 1% whit R1ca021.

    1) Attach the phone but select k750I in the little window.
    2) Unlock RSA
    3) Attach the phone and Direct Unlock at the end detach phone remove battery and cable and plug in again.
    4) Attach the phone and flash FS with this
    K750_R1BC002_FS_EU3_CID49.fbn
    5) Customize file system
    6) Attach the phone and flash SW with K750_R1BC002_MAIN_EU_EMEA_CID49.mbn
    7)Turn off the phone and remove battery and put in again.
    Cool power on and voilą phone is alive.

    Tanks who test and develop the procedure.

    1: Attach the phone
    2: Unlock RSA
    3: Attach the phone and Direct Unlock
    4: Attach the phone again and flash FS with this K750_R1BC002_FS_EU3_CID49.fbn
    5: Customize file system
    6: Attach the phone and flash SW with K750_R1BC002_MAIN_EU_EMEA_CID49.mbn
    7: Turn off the phone and Enjoy

    100% tested



    1: Attach the phone
    2: Unlock RSA
    3: Attach the phone and Direct Unlock
    4: Attach the phone again and flash FS with this K750_R1BC002_FS_EU3_CID49.fbn
    5: Customize file system
    6: Attach the phone and flash SW with K750_R1BC002_MAIN_EU_EMEA_CID49.mbn
    7: Turn off the phone and Enjoy



    W800i


    1: Attach the Phone
    2: Unlock RSA
    3: Attach the Phone Again
    4: Repair EROM
    5: Turn Off the Phone And It's Done.
    6: If it's not going to work, you need to full flash the phone.

      Current date/time is Tue Nov 19, 2024 3:29 am